Full-Spectrum LED Grow Lights
The flagship range: ten fixtures from 660W to 1600W covering flowering benches from 4×4 ft to 4×8 ft, all sharing the same RJ12 group-control interface.
How to choose
Pick in three steps. First match the flowering footprint to your bench (4×4, 4×6, 4×7 or 4×8 ft). Then choose the frame: TF/SF fold flat for freight and tight ceilings, TR/DR flexible arms set around trellis and irrigation in existing rooms. Last, decide how much spectrum control you will actually use — three channels (TF/TR) to dose UV and far-red independently, two (DR) for a settled recipe, one (SF ECO) when every watt should go into photons.
- 01
Start with the bench, not the wattage.
Flowering footprints run 4×4 ft (TF 720W, SF 660D) through 4×6 and 4×7 to 4×8 ft (TF 1600W, DR 1500W). Buying above your bench does not raise yield — it spills photons into the aisle and raises the heat you then have to remove.
- 02
Then pick the frame, because it decides your install cost.
TF and SF fold flat: cheaper freight, and they go into rooms with low clearance. TR and DR use flexible arms that set around trellis, irrigation and duct runs — which is what you want when the room already exists and you are not moving the plumbing.
- 03
Last, decide how many channels you will actually use.
Three channels (TF, TR) dim UV and far-red independently of white and blue, so you can run a different recipe in week 3 than in week 7. Two (DR) keep UV and far-red on one channel. One (SF ECO) fixes the spectrum and puts every watt into photons. A channel you never touch is a channel you paid for.
- 04
Check the electrical before you count fixtures.
Every full-spectrum page lists draw at 110 / 120 / 220 / 240 / 277 Vac. A TF 1600W pulls 13.3 A at 120 V but 5.8 A at 277 V — the supply voltage, not the fixture, usually decides how many share a breaker.
Compare the range
| Fixture | Power | PPF | Avg PPFD @ 1 ft | Flower footprint | Channels | Replaces |
|---|---|---|---|---|---|---|
| TF 1600W PRO | 1600 W | 4,480 µmol/s | 1,300 | 4ft x 8ft | 3 | 2400W HPS/MH |
| TF 1200W PRO | 1200 W | 3,360 µmol/s | 980 | 4ft x 6ft | 3 | 1800W HPS/MH |
| TF 1000W PRO | 1000 W | 2,800 µmol/s | 866 | 4ft x 6ft | 3 | 1500W HPS/MH |
| TF 720W PRO | 720 W | — | 624 | — | 3 | 1080W HPS/MH |
| TR 1000W PRO | 1000 W | 2,800 µmol/s | 866 | 4ft x 6ft | 3 | 1500W HPS/MH |
| TR 720W PRO | 720 W | 2,016 µmol/s | 624 | 4ft x 4ft | 3 | 1080W HPS/MH |
| DR 1500W PLUS | 1500 W | 4,200 µmol/s | 1,225 | 4ft x 7ft | 2 | 2250W HPS/MH |
| DR 1060W PLUS | 1060 W | 2,968 µmol/s | 866 | 4ft x 6ft | 2 | 1590W HPS/MH |
| DF 1200W PLUS | 1200 W | — | — | — | 2 | — |
| SF 880D ECO | 880 W | — | 719 | 4ft x 4ft | 1 | 1320W HPS/MH |
| SF 660D ECO | 660 W | — | 539 | 4ft x 4ft | 1 | 990W HPS/MH |
Figures are the ones our spec sheets carry. Where a cell reads “—”, the file has no verified value and we would rather show the gap than fill it.
Send dimensions, get a layout.
Room size, ceiling height, tier count and the PPFD you are targeting are enough to start. We come back with a fixture count, a room layout and a factory-direct price.
- Emailinfo@antunclelight.com
- WhatsApp+86-15017918775
- Factory2nd Floor, Building 3, Modern Industrial Park, 152 Linjiang Road, Jianghai District, Jiangmen, Guangdong 529080, China
Request a quote
Six fields and a message — the sales team replies directly.